top of page

Motorized Wafer Butterfly Valve-Electrically Actuated Butterfly Valves ,PNEUMATIC

 Motorized -PNEUMATIC-Wafer butterfly valve:

Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
Special Test: On request, any other test can be carried out according to special instruction by clien


​Size Range: 2"~36"(DN50~DN900)

Pressure: PN10, PN16, Class125 , Class 150

Body Materials: Cast Iron, Ductile Iron, WCB , Stainless Steel, Bronze

Seat Materials: NBR, EPDM, VITON, PTFE

Disc Materials: Ductile Iron, WCB, CF8,CF8M, Al-bronze C958

Stem Materials: SS416, SS304, SS316

End Connection: Wafer,Lug,Flange

Operate: Electric-Motorized

Electric Power: 220V, 380V

Motorized Butterfly Valve.jpg
bottom of page